Home
Services
About us
Contact Us
Partners
Members Login
Webmail Login
Call Center
Device Configuration
e-mail me

 


PAP2 Devices

 

Linksys PAP2

The Linksys Phone Adapter enables use of our high-quality feature-rich telephone service through your cable or DSL Internet connection. Just plug it into your home Router or Gateway and use the two standard telephone jacks to connect your existing phones or fax machines. Each phone jack operates independently, with separate phone service and phone numbers -- like having two phone lines. With OnWorld, you'll get clear telephone reception and reliable fax connections, even while using the Internet at the same time for normal data operations.

STEP 1
You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and dial:

                         **** (four asterisks)

then dial:     110 #

and you will be told the IP address of your device (e.g. 192.168.0.100)

STEP 2
Go to any browser equipped computer on your network and enter the address:

                   http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.

STEP 4
You need to modify only a few parameters from the factory default. They are listed here:

Proxy: sip.onworld.co.uk
Display Name: Enter your Full name, this will show up as part of your callerid.
User ID: Enter the phone number you chose when you signed up for OnWorld service.
Password: Enter the password that you chose when you signed up for OnWorld service.
Register Expires: 3600

STEP 5
To save bandwidth, you can change Line 1 "Preferred Codec" to G729a. Also change the "Use Pref Codec Only" to No. You can only do this for one line. So, if Line 1 is on G.729a, Line 2 has to be some other codec.

STEP 6
Click on the "Save Settings " button at the bottom of the form.

 STEP 7
Make calls!

" Linksys-ip-address" is the IP address you receive when dialing **** and 110 when prompted. The device will speak the IP address you need to insert.

PAP2 will upgrade to the new firmware when it is not in use. Fast blinking of the Status LED indicates that firmware upgrade is in progress. Please do NOT unplug the power while the Status LED blinking rapidly."


eyeBeam

 

eyeBeam

This is one of the better SIP video soft phones that we have tested. This is the quickest way to get up and running with OnWorld SIP video service. You can purchase and download it and find full documentation at Xten's website. Note: by referring you to this 3rd party site, we are neither encouraging you nor endorsing this product.

NOTE: Do not try to use the # key to send a call as it will be interpreted as part of the phone number. Use the green phone symbol or the enter key instead.

STEP 1:
When you have downloaded the eyeBeam Video Phone, click on the arrow on the left side of the software phone. Right click on the wrench symbol and the click on “Settings”. The Settings window will open.

STEP 2:
Put a check mark on the square box on the left of “Enable this SIP account” Then fill up the following fields and Click “OK”.

Display Name:  
Enter your full name, this will show up as part of your callerid.

User Name:  
Enter the phone number you chose when you signed up for OnWorld service.

Password:  
Enter the password that you chose when you signed up for OnWorld service.

Authorization user name:  
Enter the phone number you chose when you signed up for OnWorld service.

Domain:  
sip.onworld.co.uk

STEP 3
Make sure that your webcam has been installed. You should be able to see your video on the lower side of the left ear of the eyeBeam phone. If you do not see the video, it means that your webphone has not been installed properly. 

STEP 4
At this time, you should be able to dial another video phone that is on line. Simply just dial the number that you want to call. When the callee answers, click on the green “Start” button and you should be able to see the callee's video on top of your own.

STEP 5
Make calls!


X-ten X-Lite / X-Pro

 

X-ten X-Lite / X-Pro

This is one of the better soft phones that we have tested. The lite version is fairly full featured and the price is right. This is the quickest way to get up and running with OnWorld 's service until your hard phone arrives. You can download it and find full documentation at Xten's website

NOTE: Do not try to use the # key to send a call as it will be interpreted as part of the phone number. Use the green phone symbol or the enter key instead.

STEP 1:
If this window is not opened yet, right click on any part of the softphone and select “SIP Account Settings”  Click on "Add".

STEP 2:
Please enter your information the the fields that are circled in red.   Use your own display name, username (your number) and password.

STEP 3:
Make calls!